Chauvet Professional Color STRIKE M Bedienungsanleitung Seite 6

EN
Main Level
Master/Slave
Dimmer Mode
White Balance
LED Frequency
Fan Mode
Backlight
Key Lock
Ethernet Setting
Information
Upgrade Firmware
Factory Reset
USB Software Update
The Color STRIKE M allows for software updates with a USB device using the built-in USB port. To update the software
using a USB flash drive, do the following:
1. Power on the fixture, and plug the flash drive into the USB port.
5
QUICK REFERENCE GUIDE
Programming Levels
Master
Slave
OFF
DIM1–3
Off
Manual
600Hz
1200Hz
2000Hz
4000Hz
6000Hz
25000Hz
Auto
On
10s
30s
2Min
Always On
On
Off
Universe
IP Address
Fixture Hours
Version
UID
Only This Fixture
Multiple Fixtures
Other Fixture Type
No
Yes
Red
Green 125–255
Blue
0–255 (ArtNet)
1–255 (sACN)
2.192.0.1
_ _ _Hours
V_ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _.CHL
...
_ _ _ _ _ _.CHL
...
_ _ _ _ _ _.CHL
...
Description
DMX mode (master)
Slave mode
Linear dimmer
Dimming curves: Dimmer 1 (fast) to
Dimmer 3(slow)
Turns white balance off
Combines red, green, and blue to create
custom color
Sets the Pulse Width Modulation (PWM)
frequency
Sets fan to auto — fan speed adjusts
according to product temperature
Turns fan on
Turns off display backlight after
10 seconds of inactivity
Turns off display backlight after
30 seconds of inactivity
Turns off display backlight after
2 minutes of inactivity
Display backlight remains on
Turns passcode on or off (Password is
<UP>, <DOWN>, <UP>, <DOWN>,
<ENTER>)
Sets the universe
Sets the IP address
Displays total hours the product has
been powered on
Displays firmware version
Displays product UID
Selects an update file for this product, or
shows "No such file!"
Selects an update file for this and
connected Color STRIKE M products, or
shows "No such file!"
Selects an update file for other
connected products, or shows "No such
file!"
Resets settings to factory default
Color STRIKE M QRG Rev. 5