Installation; Notice - Lacor 69423 Gebrauchs- Und Instandhaltungsanleitung

1.- Open the large box. Remove all packing materials and protective covering from the unit and
parts. Do not discard the wrapping until you have checked that the blender is working
correctly.
2.- The lamp comes with both D.25 and 60 mm sliders, for mounting on round posts.
3.- Make sure the pole from which you will hang the lamp is strong enough to withstand four
times the lamps' weight, and that it has a smooth and rigid surface.
4.- Pull the removable slider upwards, position the lamp on the post to tie up (Fig.1), then return
it to its place and carefully tie it using the knob provided (Fig.2).
5.- Select the height and position of the lamp and tie firmly using the knob (Fig.3).
6.- To unfold each of the arms, pull on the chrome screw nearest the slide and with the other
hand lift the lamp into an upright position before releasing chrome screw. Make sure the arm
is secured (Fig.4).
7.- To fold the arms, lift the lamp up and pull the chrome screw.
8.- Simply unfolding the arms correctly will make them operational, thus being able to determine
which arm is functional and which is not.
1
* The power supplied to this unit must comply with electrical requirements on it's label.
Damage or fire may result if the incorrect power is used.
* Turn off all switches and unplug the unit should an emergency situation occur.
* Keep hands and other body parts clear of very hot parts. Otherwise injuries may result.
Of this device or in the case of a unit being used which has been abused;
damaged either accidentally or intentionally, modified, improperly installed or used in any
manner contrary to those included in the product instructions, guantee will automatically be
canceled.
* The machine can not be washed or placed into water as it is not a waterproof device.
Putting the unit into water may result in electric shock and will damage the mechanical and
electrical components.
* Turn off and unplug the unit when performing maintenance or cleaning the unit.
* Turn the machine off if it appears to be operating in an unusual manner.
* Please contact the seller if you lose the operations manual for a replacement.
* Please contact the seller if you find other problems not covered in the operation manual.
INSTALLATION AND ASSEMBLY
2
3

NOTICE

4
24