Specification; Worthy Information; Warranty Information - Lacor 69423 Gebrauchs- Und Instandhaltungsanleitung

Warranty Information

This manual provides the installation, safety and operating instructions for the electric heating
lamp. We recommend all installation, operating and safety instructions appearing in this manual
to be read before installation or operation.
The heating lamp is a product of extensive research and field testing. The materials used were
selected for maximum durability, attractive appearance and optimum performance.
Every unit is thoroughly inspected and tested before shipment.
IMPORTANT!
If the unit changes ownership, be sure this manual accompanies the equipment.
1.- Plug the device into a properly grounded electrical outlet of the correct voltage, size, and
plug configuration. If the plug and receptacle do not match, contact a qualified electrician to
determine the proper voltage and size, and install the proper electrical outlet.
2.- To avoid any injury, turn the power switch off, unplug the unit from the power source and
allow to cool before performing any maintenance.
3.- For safe and proper operation, the unit must be located at a reasonable distance from
combustible walls and materials.
4.- Allow a minimum of 50 cm clearance along the sides to endure proper operation and safety.
5.- To prevent any injury or damage do not pull unit by power cord.

SPECIFICATION

MODEL:
VOLTAGE:
POWER:
WEIGHT:
MEASUREMENT:

WORTHY INFORMATION

Keep these instructions for future reference.
69423
220-240V/50Hz
2000W
3,60 Kgr.
Ø100 x 8,5 cms
WARNING
22