Fuxtec FX-AD18 Original Bedienungsanleitung Seite 38

Don't disassemble and assemble the battery. The battery has the protection
⚫
equipment, if you alter it, it will make the battery heat and split.
Don't connect the anode and cathode of the battery with metallic material. Don't
⚫
transport battery with metallic material, or it will make the battery leak, heat and
split.
Don't charge in wet room or with wet hands, or you will get an electric shock.
⚫
Please use the special charger for this machine in order to avoid fire. In addition,
⚫
it is prohibited to charge other electrical machines with the special charger of this
machine or as the power.
Don't let this machine in the sun, high temperature condition and the things
⚫
radiating heat, or it will accelerate the old of the battery, make the battery leak
liquids, radiate heat, split and fire.
Don't adopt generator as the electrical source of charging, or it will destroy the
⚫
charger.
The light of the charger will light if you recharge immediately after ending charge,
⚫
it is normal. But this will result in overcharge and you should avoid the operation.
If you find the charger abnormal, pull out the plug immediately in order to avoid
⚫
electric shock, radiating heat and making fire.
Don't throw the battery into the fire or heat it up, or it will make the battery split
⚫
and electrolyte splashed.
c). Replace the fuse
In order to protect the wire and electrical machine, this machine is equipped with fuse.
If blowout due to something, please unplug the right and left fixed equipment, take out
the assembly of battery, lax the packing belt, remove the battery, open the cap of fuse
to replace the damaged fuse with new one. In addition, please find out the cause of
blowout and remedy it. After this, you could operate it again.
Some causes of blowout:
The charger doesn't coincide with the battery or has trouble.
The pesticide sticks to the liquid pump.
The wire is short circuit due to the damage.
Original-Bedienungsanleitung Akku-Druckspritze FX-AD18_rev06
15