Keysight Technologies U1190A Serie Schnellstart Handbuch Seite 5

Power ON the Clamp Meter
To power ON your clamp meter, turn the rotary
switch from the OFF position to any other
position.
Using the Wire Separator and Hook
1 Open the clamp
jaw slightly to
reveal the wire
separator tip.
Keysight U1190A Series Quick Start Guide
Mesh of
wires or
cables
2 Separate the
desired wire or
cable by
hooking it in
the clamp jaw.
3 Secure the
wire or cable
and read the
measurement.
5