Keysight Technologies U1190A Serie Schnellstart Handbuch Seite 2

Contacting Keysight
www.keysight.com/find/assist
(worldwide contact information for
repair and service)
Safety Information
This meter is safety-certified in
compliance with EN 61010-1
(IEC 61010-1:2001 and IEC/EN
61010-2-032:2002) for a CAT III
600 V and CAT IV 300 V pollution
degree 2 environment.
EMC is designed in compliance
with IEC 61326-1:2005/EN
61326-1:2006. Use with standard
or compatible test probes.
Safety Notices
CAUTION
A CAUTION notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly
performed or adhered to, could
result in damage to the product or
loss of important data. Do not
proceed beyond a CAUTION notice
until the indicated conditions are
fully understood and met.
WARNING
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly
performed or adhered to, could
result in personal injury or
death. Do not proceed beyond a
WARNING notice until the
indicated conditions are fully
understood and met.
For further safety information details, refer to the
Keysight U1190A Series Handheld Clamp Meter User's Guide.
2
Safety symbols
Earth (ground) terminal
Equipment protected
throughout by double
insulation or reinforced
insulation
Caution, risk of electric
shock
Caution, risk of danger
(refer to the instrument
manual for specific Warning
or Caution information)
Application around and
removal from HAZARDOUS
LIVE conductors is
permitted
Category III 600 V
CAT III
overvoltage protection
600 V
Category IV 300 V
CAT IV
overvoltage protection
300 V
Keysight U1190A Series Quick Start Guide