TDK-Lambda DTM65 Produkthandbuch Seite 15

DTM65 Product HANDBOOK
Cooling for unit
The DTM65 products are external power supplies. To ensure correct thermal performance at full load the
product should be installed in the end use equipment as below and the operating ambient must not exceed
50° C.
Installation orientation: For optimum thermal performance – mount the DTM65-xx product on its rubber feet
with the product label uppermost.
EMC Performance: Tested to EN60601-1-2:2001. Final compliance must be checked in the end system.
Symbols:
AC EARTH
Product label
DC
Page 15 of 16 72657 issue 1, December 2011