TDK-Lambda DTM65 Produkthandbuch Seite 14

DTM65 Product HANDBOOK
Input Parameters:
Standard
Nominal input voltage
Input voltage range
Nominal Input frequency
Maximum input current
Input Connections: AC inlet IEC320-14 (accepts IEC320-C13)
Output Parameters:
Output channel
DTM65PW120C
DTM65PW150C
DTM65PW180C
DTM65PW240C
DTM65PW360C
DTM65PW480C
Output Connections: Kycon KPPx-4P or equivalent (see mechanical drawing below)
All individual outputs are SELV.
Note:
Non-SELV outputs are hazardous and must not be made user accessible. They must be guarded or a
deflector fitted during installation to avoid a service engineer making inadvertent contact with the output
terminals, or dropping a tool onto them.
All outputs have operational spacings to earth, and due consideration must be given to this in the end product
design.
Safety Approvals:
IEC/EN/60601-1 CB Report and Certificate.
UL/CSA 60601-1 - UL + C -UL approval
CE mark.
CE marking when applied to any DTM65-xx product, indicates compliance with the Low Voltage Directive
(2006/95/EC) in that it complies with EN60950-1, 2
60601-1
100-240VAC
90-264VAC
50-60Hz
2A
Vout (V) Adjustment
range (V)
12
15
18
N/A
24
36
48
Page 14 of 16
Output Maximum
current (A) power (W)
5.0 60
4.0 60
3.6 65
2.7 65
1.8 65
1.35 65
nd
Edition
72657 issue 1, December 2011