Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Quicklinks
PA620-04-xxx
PA634-04-01E
DRB120 Series Instruction Manual
General Safety Instructions:
READ SAFETY INSTRUCTIONS
Servicing:
These products are not customer serviceable TDK-Lambda UK LTD and their authorised agents only are permitted to carry out
repairs.
Critical Components:
These products are not authorised for use as critical components in nuclear control systems, life support systems or equipment for
use in hazardous environments without the express written approval of the Managing Director of TDK-Lambda EMEA.
Product Usage:
These products are designed for use within a host equipment which restricts access to authorised competent personnel.
This product is a component power supply considered apparatus and is only to be installed by qualified persons within other
equipment and must not be operated as a stand-alone product.
This product is for sale to business to business customers and can be obtained via distribution channels.
It is not intended for sale to end users.
This product is considered to be apparatus and complies with the EMC directive. Compliance with the EMC directive must be
considered in the final installation. Please contact your local TDK-Lambda office
Environmental:
These products are IPX0, and therefore chemicals/solvents, cleaning agents and other liquids must not be used.
Environment:
This power supply is a switch mode power supply for use in applications within a Pollution Degree 2, overvoltage category II
environment. Material Group IIIb PCB's are used within it.
Output Loading:
The output power taken from the power supply must not exceed the rating stated on the power supply label, except as stated in
the product limitations in this handbook.
Input Parameters:
This product must be operated within the input parameters stated in the product limitations in this handbook.
End of Life Disposal:
The unit contains components that require special disposal. Make sure that the unit is properly disposed of at the end of its
service life and in accordance with local regulations
DOWNLOADED FROM WWW.SCATTS.CO.UK
DOWNLOADED FROM WWW.SCATTS.CO.UK
TDK-Lambda
DRB120 Series
INSTRUCTION MANUAL
ENGLISH
Werbung
Verwandte Anleitungen für TDK-Lambda DRB120 Serie
Inhaltszusammenfassung für TDK-Lambda DRB120 Serie
- Seite 1 General Safety Instructions: READ SAFETY INSTRUCTIONS Servicing: These products are not customer serviceable TDK-Lambda UK LTD and their authorised agents only are permitted to carry out repairs. Critical Components: These products are not authorised for use as critical components in nuclear control systems, life support systems or equipment for use in hazardous environments without the express written approval of the Managing Director of TDK-Lambda EMEA.
- Seite 2 Internal fuses protect the unit and must not be replaced by the user. In case of internal defect, the unit must be returned to TDK-Lambda UK LTD or one of their authorised agents. A suitable mechanical, electrical and fire enclosure must be provided by the end use equipment for mechanical, electric shock and fire hazard protection.
- Seite 3 Allgemeine Sicherheitsvorschriften: LESEN SIE DIE SICHERHEITSVORSCHRIFTEN Wartung: Diese Produkte können nicht durch den Kunden gewartet werden. Nur TDK-Lambda UK LTD. und deren zugelassene Vertriebshändler sind zur Durchführung von Reparaturen berechtigt. Kritische Komponenten: Diese Produkte sind nicht für die Verwendung als kritische Komponenten in nuklearen Kontrollsystemen, Lebenserhaltungssystemen oder Geräten in gefährlichen Umgebungen geeignet, sofern dies nicht ausdrücklich und in Schriftform...
- Seite 4 Eine interne Sicherung schützt das Gerät und darf durch den Benutzer nicht ausgetauscht werden. Im Fall von internen Defekten muss das Gerät an TDK-Lambda UK LTD oder einen der autorisierten Vertriebshändler zurückgeschickt werden. Ein geeignetes mechanisches, elektrisches und brandgeschütztes Gehäuse muss als Schutz vor der Gefahr von mechanischen Risiken, Stromschlägen und Brandschutz in dem Endgerät vorgesehen werden.
- Seite 5 Consignes générales de sécurité: LIRE LES CONSIGNES DE SECURITE Entretien: Ces produits ne peuvent pas être réparés par l’utilisateur. Seuls, TDK-Lambda UK LTD et ses agents agréés sont autorisés à effectuer des réparations. Composants critiques: Ces produits ne doivent pas être utilisés en tant que composants critiques dans des systèmes de commande nucléaire, dans des systèmes de sauvetage ou dans des équipements utilisés dans des environnements dangereux, sans l'autorisation écrite expresse du...
- Seite 6 Un fusible interne protège le module et ne doit pas être remplacé par l'utilisateur. En cas de défaut interne, le module doit être renvoyé à TDK-Lambda UK LTD ou l'un de ses agents agréés. Une enceinte appropriée doit être prévue par l'utilisateur final pour assurer la protection contre les chocs mécaniques, les chocs électriques et l'incendie.
- Seite 7 Questo prodotto non è inteso per la vendita al dettaglio o agli utilizzatori finali. Questo prodotto è da considerarsi come apparato e conforme con la direttiva EMC. Conformità alla direttiva EMC deve essere considerata nell'installazione finale. Gli uffici di TDK-Lambda Sas Succursale Italiana sono a vostra disposizione per ulteriori ragguagli.
- Seite 8 Un fusibile interno protegge l'unità e non deve essere sostituito dall'utente. Nell'eventualità di un difetto interno, restituire l'unità a TDK-Lambda UK LTD o a uno dei suoi agenti autorizzati. L'apparecchiatura finale deve includere una recinzione meccanica, elettrica e antincendio per proteggere dai pericoli di natura meccanica, dalle scosse elettriche e dai pericoli di incendio.
- Seite 9 Instrucciones generales de seguridad: LEA LAS INSTRUCCIONES DE SEGURIDAD Servicio: Estos productos no pueden ser reparados por los clientes. TDK-Lambda UK LTD. y sus agentes autorizados son los únicos que pueden llevar a cabo las reparaciones. Componentes fundamentales: Estos productos no pueden ser utilizados como componentes fundamentales en sistemas de control nuclear, sistemas de soporte vital o equipos a utilizar en entornos peligrosos sin el consentimiento expreso por escrito del Director General de TDK-Lambda EMEA.
- Seite 10 Un fusible interno protege la unidad y este no debe ser nunca reemplazado por el usuario. En caso de existir algún defecto interno, la unidad debe ser enviada a TDK-Lambda UK LTD o a uno de sus agentes autorizados. El equipo de uso final debe constituir un recinto de protección mecánica, eléctrica y contra incendios de protección mecánica, contra descargas eléctricas y contra el peligro de incendios.
- Seite 11 Instruções gerais de segurança: LEIA AS INSTRUÇÕES DE SEGURANÇA Manutenção: Estes produtos não são podem ser submetidos a manutenção por parte do cliente. Apenas a TDK-Lambda UK LTD e os seus agentes autorizados têm permissão para realizar reparações. Componentes essenciais: Não é...
- Seite 12 Existe um fusível interno que protege a unidade e que não deve ser substituído pelo utilizador. Em caso de defeito interno, a unidade deve ser devolvida à TDK-Lambda UK LTD ou a um dos seus agentes autorizados. O equipamento de utilização final deve fornecer um bastidor com protecção mecânica, eléctrica e contra incêndios adequada.
- Seite 13 DOWNLOADED FROM WWW.SCATTS.CO.UK TDK-Lambda PA620-04-xxx PA634-04-01E DRB120 Series INSTRUCTION MANUAL BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage could lead to an electrical shock, damage to the unit or a fire hazard.
- Seite 14 DOWNLOADED FROM WWW.SCATTS.CO.UK TDK-Lambda PA634-04-01E DRB120 Series INSTRUCTION MANUAL Note: CE MARKING CE Marking, when applied to a product covered by this handbook indicates compliance with the following: Low Voltage Directive in that it is complies with EN60950-1 and EN62368-1.
- Seite 15 DOWNLOADED FROM WWW.SCATTS.CO.UK TDK-Lambda PA634-04-01E DRB120 Series INSTRUCTION MANUAL 3. Terminal Connecting Method 4-5. Peak output current Pay attention to the input wiring. If it is connected to wrong The DRB120 can deliver 120% peak current for 10 terminal, the power supply will be damaged.
- Seite 16 DOWNLOADED FROM WWW.SCATTS.CO.UK TDK-Lambda PA634-04-01E DRB120 Series INSTRUCTION MANUAL 4-7. Series Operation 4-9. Withstand Voltage For series operation, either method (A) or (B) is possible. This series is designed to withstand 4243VDC between input and output, 2500VDC between input and...
- Seite 17 DOWNLOADED FROM WWW.SCATTS.CO.UK TDK-Lambda PA634-04-01E DRB120 Series INSTRUCTION MANUAL 4-10. Output Dynamic Load Response 6.1. Power supply mounting on DIN RAIL (TS35 or equivalent) During output dynamic load test (0%-100% load), the output voltage level might experience a higher voltage dip Make sure input and output wire disconnected when of -8% (typ).
- Seite 18 DOWNLOADED FROM WWW.SCATTS.CO.UK TDK-Lambda PA634-04-01E DRB120 Series INSTRUCTION MANUAL (3) Press against the bottom front side for locking. 7. Output Derating – DRB120 series Shake the unit slightly to check the locking action. OUTPUT DERATING CURVE DRB120-24-1 Input Details 100-240VAC 1.5A...
- Seite 19 Internal Fuse 4) For indoor use only. Live(L) line INPUT Product marking: Fuse TDK-Lambda Singapore Pte. Ltd. 100-240VAC/20A (Sales, Services and R&D) 1008 Toa Payoh North #06-01/08, #07-01/03 Singapore 318996 Telephone: +65 62517211 Facsimile: +65 62509171 10. External Fuse Rating WEBSITE: www.sg.lambda.tdk.com...
- Seite 20 DOWNLOADED FROM WWW.SCATTS.CO.UK TDK-Lambda PA634-04-01E DRB120 Series INSTRUCTION MANUAL DRB120-24-1 Input Details 100-240VAC 1.5A Frequency: 50 / 60Hz Rated Output Details DC 24-28V/5-4.3A IND.CONT.EQ. Peak Output Details* E483168 DC 24-28V/6-5.14A/Max 10sec. Maximum power: 120W Caution: For use in a controlled environment, refer to manual for conditions.
- Seite 21 At Scattergood & Johnson Ltd, we pride ourselves on being a technical distributor to specialist industries. Working with a range of quality product suppliers across a number of specialist markets, we are not your average ‘box shifter’ - we are your technical and supply chain partner. We fully support every product we sell - for free! Our internal team and external sales engineers can answer any product or application question, no matter the complexity.