Philips StoreSet Track SM505T Installationsanleitung

StoreSet
Track
SM505T
indoor
Lumen package
SM505T
LED66S / LED80S / LED90S
! - The luminaire shall be installed by a quali ed eledtritian and wired
in accordance with the latest IEE electrical regulations or the
national requirements.
-
The light source contained in this luminaire is non-user replaceable.
The driver and the light source shall only be replaced by the manufacturer or
his service agent or a similar quali ed person.
Do not touch electronic components!
-
Electronic components may be under high voltage.
Caution, risk of electric shock.
The luminaire shall, under no circumstance, be covered
-
with thermal insulation matting or similar material.
!
Dimensions in mm
583-444316015737
©
Signify Holding. All rights reserved
220V 50Hz
240V 60Hz
CCT
830 / 835 / 840 /
930
605
575
IP20
kg
m
2
0.1 2.2
The light source contained in this luminaire
shall only be replaced by the manufacturer or
his service agent or a similar quali ed person.
1/8
Max.
GLOW
35 °C
WIRE
Min.
650 °C
10 °C
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
SENSITIVE
DEVICES
49
184
Printed in Hungary
Data subject to change without notice
Keep for future reference: www.philips.com/lighting
75