Texi Zorro 110 Free Bedienungsanleitung Seite 24

TEXI Zorro 110 Free operation manual
Technical specification
Knife Size
Cutting height
Max Power
Noise
Weight
5 speed
Battery capacity
Voltage
Set with 2 pcs of 8-curves knife blades, diameter 110 mm.
Set with charger + 2 accu .
Battery installation
CAUTION: Before installing lithium battery into the cutting machine make sure that power
switch is off (position marked as "0").
Power must be switched off during the whole operation, also when battery is removed or
replaced!
1. Install the lithium battery into the battery slot located in the rear part of the cutting ma-
chine (drawing below).
2. Pay attention for the correct position (direction) of the battery while it is inserting to the
slot.
3. Push battery until you will hear click sound, it means that battery is safely locked.
24
Diameter 110 mm
32 mm
150 W
<55dB
1,5 kg
800/950/1100/1250/1400 r.p.m.
2500 mAh
16.8V