Using The Appliance - Ecg Rk 1781 Glass Bedienungsanleitung

lid, the outer surfaces are hot. Do not use the appliance close to objects
which can be damaged by steam.
DANGER TO CHILDREN: Children may not play with the packaging
CAUTION
1. Always use cold water when filling the kettle.
2. The water level must be between the MAX. and MIN. levels!
Hot water may spurt out if the kettle is overfilled.
3. Switch off the kettle before removing it from the base.
4. Always make sure the lid is well closed.
5. The base and kettle body should not be wet.
6. Only use the kettle in combination with its original base.
You may not use the kettle to heat any other liquids than water. Never put in the kettle tea bags, loose
tea or any other ingredients for making beverages!

USING THE APPLIANCE

Remove and wash the appliance before first use with an ordinary detergent used for washing dishes. Then
rinse with lukewarm water.
Fill the kettle with clean, cold and potable water up to max. level before first use, switch it on and bring the
water to a boil. Then pour the water out and repeat the procedure at least five times. With this procedure you
will properly clean the kettle and remove any possible after-taste. If you have the impression that you taste
plastic from the boiled water, we recommend to repeat the procedure. It is also recommended the leave the
empty kettle open for 24 hours. The kettle material coming into contact with water is certified as harmless to
health. Any slight "smell" or "after-taste" during initial use after unpacking kettle is a normal phenomenon and
should not be cause for return of the appliance.
1. Fill the kettle with water. Do not overfill the kettle, watch the water level indicator.
2. Place the kettle on its base.
3. After connecting the appliance to the electrical socket, press the ON/OFF button (5). Blue backlight of the
buttons signals the heating of water.
4. The kettle will switch off automatically after the boiling process has finished.
5. Unplug the cord from the outlet.
6. Do not open the lid when pouring the water out.
Warm up to set temperature
1. Start the same way as when boiling water.
2. Use the buttons to increase (4) and decrease (2) the temperature to set the desired heating temperature.
The set temperature is displayed by illuminating the corresponding indicator (3).
3. Press the ON/OFF (5) button.
4. When the set temperature is reached, the kettle switches off automatically.
Keep warm temperature
The kettle is equipped with the function of maintaining the temperature, when activated with the appropriate
button (1), the kettle will maintain the current water temperature for a maximum of 2 hours.
• Press the temperature maintenance function button (1) first and then the on/off button (5)
Do not immerse in water!
material. Do not let children play with the
plastic bags. Risk of suffocation.
5