Herunterladen Inhalt Inhalt Diese Seite drucken

eta FRISK Bedienungsanleitung Seite 25

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 47
– To avoid stumbling, lead the cable outside the regular walking areas.
– Check the condition of the power cord of the appliance regularly.
– Avoid winding the power cord around the appliance, otherwise the power cord service
life would be reduced.
– If you need to use an extension cord for justified reasons, it must be undamaged
and comply with the applicable standards.
– Only use this appliance for the purpose it was designed for, as specified in this manual.
Never use the appliance for any other purpose.
– The manufacturer assumes no responsibility for any damage caused by improper handling
of the appliance and its accessories (e.g. electric shock, fire), and the appliance guarantee
will become void if any of the aforementioned safety instructions are not observed.
II. DESCRIPTION OF THE APPLIANCE (Fig. 1,2)
A – main unit
A1 – pollution sensor opening + filter
A2 – handles
A3 – HEPA filter
A4 – carbon filter
A5 – pre-filter
A6 – pollution indicator
A7 – humidifying tank
B – control panel
B1 – ON/OFF switch
B2 – fan speed button
B3 – child safety lock
B4 – ionization button
B5 – filter exchange / cleaning button
B6 – timer button
B7 – "SLEEP" button
B8 – light sensor
B9 – ionization indicator
III. INSTRUCTIONS FOR USE
CONTROLS
Remove any packaging material from the appliance, including filter packaging, etc. After
switching the purifier into standby mode, plug the power cable in electrical socket. Acoustic
signal sounds and light indicators goes on for a moment.
ON/OFF button B1 – by pressing the button, the purifier will switch on in the basic filtration
Note You turn on / off the pollution indicator A6 while the appliance is on by pressing the
button for 5 seconds.
mode (without ionization, speed 2
again, the settings will be cleared and the purifier will switch back to
the standby mode.
A8 – humidifying filter
A9 – humidifying container
A10 – container´s valve
A11 – water mark
A12 – arrest button
A13 – aroma container
A14 – aroma filter
B10 – lock indicator
B11 – automatic mode indicator
B12 – fan speed indicator
B13 – on / off indicator
B14 – filter cleaning indicator
B15 – filter exchange indicator
B16 – Timer indicator
B17 – SLEEP mode indicator
B18 – humidifying indicator
). When you press the button
25 / 55
GB

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis