Futech MULTIPOWER 3.6 COMPACT Kurzanleitung Seite 40

holder, observing the correct
polarity.
∙ Put the battery cover back in
place. Secure with the screw.
7.2 Replacing the fuses
∙ Disconnect the test leads from
the meter
∙ Remove the batterycover
∙ Gently remove the old fuse
and install the new fuse into
the holder.
∙ Always use a fuse of the prop-
er size and value (0.5A/600V)
fast blow for the 600mA range,
10A/600V fast blow for the 20A
range.
∙ Replace and secure the rear
cover, battery and batterycov-
er.