Renkforce 2339782 Bedienungsanleitung Seite 2

Operating instructions
USB-C connector to VGA socket adapter
Item No. 2339782
Intended use
The product is used to connect a display device with a VGA connection (e.g. TV, monitor,
projector, etc.) to a playback device with USB-C
notebook, etc.).
Contact with moisture (e.g. in a bathroom) must be avoided under all circumstances.
For safety and approval purposes, do not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
In addition, improper use can result in or other hazards. Read the instructions carefully and
store them in a safe place. Always provide these operating instructions when passing the
product on to a third party.
This product complies with statutory, national and European regulations. All company and
product names contained herein are trademarks of their respective owners. All rights reserved.
Delivery content
• Adapter
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads
or scan the QR code shown. Follow the instructions on the website. The
operating instructions for this product can also be downloaded from this link.
Description of symbols
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and tips on how to use the product.
Safety Information
Read the operating instructions and safety information carefully. If you do
not follow the safety information and information on proper handling in these
operating instructions, we will assume no liability for any resulting personal
injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become
a dangerous plaything for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Never expose the product to mechanical stress.
• Handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• When setting up the product, ensure that the cables are not pinched, kinked or
damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them.
Risk of injury.
• The product must be easily accessible at all times.
• Never use the product immediately after it has been taken from a cold room into to
a warm one. This may cause condensation to form, which can destroy the product.
Allow the product to reach room temperature before connecting it to the power
supply and putting it into use. This can possibly take several hours.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorised use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in adverse ambient conditions or
- has been subjected to any serious transport-related stress.
• Consult a technician if you are not sure how to use or connect the product, or if
you have concerns about safety.
• Maintenance, modifications and repairs must be performed by a technician or
a specialist repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
• Observe the safety information and operating instructions of any other devices
which are connected to the product.
connection (e.g. tablet, smartphone,
TM
Ports
1
1 USB-C male
TM
Usage
Some operating systems are not compatible with this product. Refer to the 'Technical
data' section for information on supported operating systems.
• Connect the USB-C plug (1) to a USB-C
TM
tablet or smartphone).
• You can now connect a suitable display device to the VGA connection (2) (e.g. TV set,
monitor, projector etc.).
Care and cleaning
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical
solutions, as these may damage the housing or impair the functioning of the device.
• Disconnect the product from the connected devices before cleaning.
• Use a dry, lint-free cloth to clean the product. Do not allow water to get inside the housing.
• To prevent scratch marks, do not press too strongly on the surface when cleaning.
Disposal
Electronic devices are recyclable waste and must not be placed in household
waste. At the end of its service life, dispose of the product according to the relevant
statutory regulations.
You thus fulfil your statutory obligations and contribute to environmental protection.
Technical Specifications
Supported resolution ...............................max. 1920 x 1080 Pixels @ 60 Hz
Supported operating systems ..................Windows
Operating conditions: ............................... 0 to +45 ºC, 10-85 % relative humidity
Storage conditions: ..................................-20 to +70 ºC, 10-85 % relative humidity
Dimension (WxHxD) ................................45 x 15 x 45 mm
Length of connection cable ......................11 cm
Wight .......................................................27 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or capture in electronic
data processing systems, requires the prior written approval of the publisher. Reprinting, also in part, is prohibited. This
publication reflects the technical status at the time of printing.
Copyright 2021 by Conrad Electronic SE.
2
2 VGA port
port on your playback device (e.g. laptop,
TM
7 and later; MacOSX; Chrome OS
®
*2339782_v1_0621_02_ds_m_4L_(1)