Before Commissioning - Ikra ICBV 2/20 Originalbetriebsanleitung

EN ENGLISH
repaired before use. Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and clean. Properly
f)
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when
used with another battery pack.
b) Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
When battery pack is not in use, keep it away from
c)
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
SAFETY INSTRUCTIONS FOR THE LEAF VACUUM/LEAF BLOWER
WARNING
This device must not be operated by children or
persons with reduced physical, sensory or mental
capabilities or with a lack of knowledge and experience.
Children shall not play with the appliance. Children are
not allowed to carry out cleaning or user maintenance
unless under supervision.
There may also be an age restriction for the user
defined by local regulations.
Do not operate the device when persons, especially
children or pets are nearby.
WARNING
Do not use the device if there is rain or dampness.

Before commissioning

WARNING
Risk of injury! A device that has not been assembled
completely can cause serious injuries.
Fully assemble the device before you operate it and
connect it to the power supply.
22
d) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
6) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
WARNING
Wear personal protective equipment.
• Wear goggles.
• Wear ear protectors.
• Wear solid shoes and long trousers. Wear this protective
clothing at all times when the machine is being used.
Do not operate the machine with bare feet or with open
sandals.
• Do not wear loose fitting clothing or clothing with
hanging laces or ties.
• Do not wear any hanging clothing or jewellery that can
be sucked into the vacuum opening.
• Keep long hair away from the vacuum openings.
Operate the machine in a recommended position
and only on a fixed and even surface. Do not operate
the machine on a cobbled surface or on a gravel
surface where material that is ejected could cause
injuries.
Check the work area before using the appliance.
Remove any hard objects such as stones, shards of
glass, wires, etc. that could be thrown off, knocked back
or that could otherwise cause injury or damage during
appliance operation.
Always carry out a visual inspection before use. The
device must not be used if it is damaged, not correctly
installed or if the safety devices are defective. Replace
any worn and damaged parts.
Only use if the correct equipment is attached. Never
use the machine if the cover or protective device are