Using Your Jabra Stone With Two Mobile Devices - Jabra STONE Handbuch

All manuals and user guides at all-guides.com
Jabra Stone StatusDisplay
non-activity to save battery . only when in pairing mode the
StatusDisplay will remain turned on for longer time (3 min) . the
tM
headset is still active, and light will flash again after a tap on the
answer/end button or any call activity .
Light indicator on charging unit:
by the charge plug on the charging unit a light indicator shows
different states of the charging unit . that way you will always
know if the charging unit needs to be charged .
Portable charging unit - light indicator
Solid red light
Single green flash
Single red flash
Communication by sound alerts
Your Jabra Stone employs sound alerts to communicate different
actions or information . one important alert is "Low battery", which
is two short beeps, and indicates 10 minutes of talk time remains .
UsInG YoUR JABRA stone WItH tWo MoBILe
DeVICes
the Jabra Stone is capable of having two mobile phones (or
devices) connected to the headset at the same time .
this will give you the freedom of having only one headset to
operate both of your mobile phones .
How to pair your Jabra STonE with 2
1 Pair device number 1 with your headset using the pairing
instruction above for re-pairing your headset (if device 1 is
paired to your headset already go to step 2)
2 turn your headset off manually by pressing the answer/end
button for 4-5 seconds
3 Pair device number 2 with your headset using the same pairing
instruction again
will turn off after 4 seconds of
tM
Is charging (red light will turn off when
fully charged)
enough battery to charge headset
1 full time or more
Portable charger needs to be charged
Jabra Stone
devices:
9