Explanation Of Type-Identifying Marking And Symbols - Dräger HPS 7000 Gebrauchsanweisung

3.5 Explanation of type-identifying marking and
symbols
The type identical identification mark is located on the
packaging or the individual components.
3.5.1 Label on fire helmet
1 3
0158
Typ B3 b
5 6-6 6
EN 443:2008
PA-GF
EN 16471:2014
E2 E3 C * * * *
EN 16473:2014
CA 32878
Revalstraße 1, D-23560 Lübeck, Germany
2
1 Approval body
2 Standards by which the approval is granted
3 Serial number
4 Various markings (see table below)
5 Helmet type and helmet size H1 or H2
6 Date of manufacture
7 Manufacturer
Marking Explanation of the marking
DST Manufacturer code
Dräger Safety AG & Co. KGaA
B 3b Type: Integrated helmet/helmet model:
HPS 7000
50–62 Head circumference in cm for H1
56–66 Head circumference in cm for H2
PA-GF Code designation of helmet material (glass-
fibre reinforced, thermosetting plastic)
Symbol for "See instructions for use"
Optional properties and markings
E2, E3 Electrical insulation
C Chemical permeation resistance
**** The fire helmet is designed for use in
temperatures down to -40 °C
Approved in accordance with MED
3.5.2 Label on the packaging
Marking Explanation of the marking
HPS 7000 Helmet type
H1, H2 Helmet size 1, helmet size 2
REF Order number
Dräger HPS 7000
4 5
D ST
HPS 7000 H2
7 6
Marking
LOT
CE0158
3.5.3 Marking on the visors
The marking for the visors is engraved. It has the following
meaning:
Marking
EN 14458:2018
DST
R79239
03/19
+

02721991.eps

R1, R2
BT
AT
E1, E3
H1, H2
Optional characteristics and markings
-40 °C; +120 °C
or
-30 °C; +50 °C
or
-30°C; +120 °C
K
N
2C-1.2
2C-2
2C-2.5
2C-4
5-2
5-4.1
1
2-4
4-4
4
Explanation of the marking
Serial number
Approval body
Symbol for "See instructions for use"
Explanation of the marking
European standard and the basis for
approval
Manufacturer abbreviation
Dräger Safety AG & Co. KGaA
Example for order number of the visor
Example for production month and year
Symbol for increase thermal performance
Symbol for rating as face protector
Symbol for rating as eye protector
Radiant heat protection level for visors with
increased thermal performance
Medium-strength (120 m/s) impact
durability at extreme temperatures
Durability with regard to an impact of high
strength (190 m/s) at extreme temperatures
Electrical properties
Symbol for "See Instructions for Use"
Visor for helmet size 1 or 2
Extreme temperatures the visor is
approved for
Abrasion resistance
Resistance to fogging
UV protection filter according to EN 170
Sun protection filter according to EN 172
Optical class 1
Protective filter against ultraviolet light
Protective filter against infrared light
Welding protection filter
Description
17