Troubleshooting - EINHELL KH 500 Originalbetriebsanleitung

Anleitung_KH_500_SPK7__ 05.06.14 14:53 Seite 11

11. Troubleshooting

If the equipment is operated properly you should experience no problems with malfunctions or faults. In the
event of any malfunctions or faults, please check the following before you contact your customer services.
Fault
Equipment does not work
The equipment does not heat
Possible cause
Power plug is not connected
Topple cut-out switch not pressed
Overheating guard has been
triggered
GB
Remedy
Connect the power plug
Place the machine on a level
surface.
Please note section 7.3
11