Sharp ER-A610 Programmierhandbuch Seite 146

PRINT FORMAT
When file deletion has successfully terminated:
#0895 ∗Π Γ Μ ≤ ∗
δελετε
φ1100111. δατ
When file deletion has been canceled:
#0895 ∗Π Γ Μ ≤ ∗
δελετε
φ1100111. δατ χανχελ
DISPLAY FORMAT
DELETE/CANCEL
F1100111 DEL?
During deletion
DELETE F1100111
4-5) Sending file data to the ER-02FD
This function causes the ECR to send files to the ER-02FD.
Procedure for PGM job #896
896 X (FILE No.)
The ECR can send specified files to a floppy disk in the ER-02FD
connected to it when the above job is performed.
If a specified file is not present in the floppy disk, the corresponding
file is created, and if a specified file is present in the floppy disk, that
file is deleted and new file data is written to the disk.
If any specified file is not present in the ECR, a "ENTRY ERROR"
error occurs.
The ECR displays "(FILE NAME) SEND?" when the TL key is
pressed after the entry of a file number in the above procedure. To
send the file, it is necessary to press the TL key; and to cancel the
send operation, it is necessary to press the
PRINT FORMAT
When the send operation has successfully terminated:
#0896 ∗Π Γ Μ ≤ ∗
σενδ
φ1100111. δατ
When the send operation has been canceled:
#0896 ∗Π Γ Μ ≤ ∗
σενδ
φ1100111. δατ χανχελ
JOB CODE/MODE TITLE
οκ
TL TL To send file name
To cancel the send
X
file operation
⊗
key.
JOB CODE/MODE TITLE
οκ
DISPLAY FORMAT
SEND/CANCEL
F1100111 SEND?
During sending
SEND F1100111
The ER-02FD function checks the capacity of a floppy disk placed in
the ER-02FD before file data is sent to it.
If the disk capacity is found insufficient (or error 8 occurs) in this
checking, file data of the size that can be stored in that disk is sent to
the ER-02FD to create one file and the remaining data can be sent
after that disk has been replaced with a new floppy disk. This function
is called multi media function.
Example: Creation of a PLU transaction file (F1201111.DAT)
1. Creation of a PLU transaction file is attempted, but the disk
capacity is found insufficient.
PRINT FORMAT
#0896 ∗Π Γ Μ ≤ ∗
σενδ
DISPLAY FORMAT
F1100111
SEND OR CANCEL?
⊗
Either the
key (to send file data) can be entered.
2. The TL key is entered to create a file of the size that is within
the remaining capacity of the disk.
DISPLAY
SEND
3. File creation terminates successfully and a request for floppy
disk replacement is made.
PRINT FORMAT
#0896 ∗Π Γ Μ ≤ ∗
σενδ
φ1200111. δατ
DISPLAY FORMAT
F1200111
The TL key can be entered.
4. After the existing floppy disk, the CA key is entered.
Then the remaining data is successfully stored in another file
in the new disk.
PRINT FORMAT
#0896 ∗Π Γ Μ ≤ ∗
σενδ
φ1200111. δατ
φ1200111. δατ
™ 57 ™
JOB CODE/MODE TITLE
ερρορ 8
OK?
key (to cancel the send operation) or the TL
FORMAT
F1201111
JOB CODE/MODE TITLE
ερρορ 8
οκ
OK?
JOB CODE/MODE TITLE
ερρορ 8
οκ
οκ