Equalizer Function - Makita MR006G Betriebsanleitung

Baustellenradio

Seite von 182

/ 182
Inhalt
Inhaltsverzeichnis
Lesezeichen

Inhaltsverzeichnis

Verfügbare Sprachen

A beep tone will activate when selecting the HWS

buzzer alarm.

The alarm beep will sound shorter every 15 seconds

for one minute followed by one minute silence before

repeating the cycle.

1. The buzzer alarm can be set either when the radio is

on or off.

2. Press and hold the buzzer alarm button, the buzzer

alarm symbol and the display hour will flash along

with a beep.

3. During buzzer alarm symbol flashes, rotate the

Tuning control knob to select the hour and press the

Tuning control knob to confirm hour setting. Then

rotate the Tuning control knob to select the minute

and press Tuning control knob to confirm minute

setting.

4. Rotate the Tuning control knob and the display will

show the frequency options for the alarm.

The alarm options are as follows:

ONCE – the alarm will sound once

DAILY – the alarm will sound everyday

WEEKDAY – the alarm will sound only on weekdays

WEEKEND – the alarm will sound only at weekends.

Press the Tuning control knob to confirm the setting.

Note:

There is no volume adjustment for buzzer alarm.

Stopping the alarm sound

To cancel a sounding alarm, press the Power button.

Disable the alarm setting

To disable the alarm setting before the alarm sounds,

press and hold the corresponding alarm button until

alarm symbol disappears on the display.

Snooze

1. When the alarm sounds, press any button other than

the Power button will silence the alarm for 5 minutes.

"SNOOZE" will appear on the display.

2. To adjust the silence time for the snooze timer, press

and hold the Menu/Info button to enter the menu

setting.

3. Rotate the Tuning control knob until "SNOOZE X"

appears on the display, then press the Tuning control

knob to enter the setting. Rotate the Tuning control

knob to adjust the silence time from 5, 10, 15 and

20 minutes for the snooze timer. Press the Tuning

control knob to confirm the setting.

4. To cancel the snooze timer while the alarm is

suspended, press the Power button.

Sleep timer

Your radio can be set to turn off automatically after a

preset time has elapsed. The Sleep Timer setting can be

adjusted between 60, 45, 30, 15, 120 and 90 minutes.

1. Press and hold the Power button to enter the Sleep

Timer setting. "SLEEP XX" will show on the display.

2. Keep holding the Power button and the Sleep Timer

options will start switching on the display. Stop until

the desired Sleep Timer setting appears on the

display. The setting will be saved and the LCD will

return to normal display.

3. Your radio will switch off automatically after the preset

Sleep Timer has elapsed. The Sleep Timer icon will

be shown on the display indicating an active Sleep

Timer.

4. To cancel the Sleep Timer function before the preset

time has elapsed, simply press the Power button to

turn the unit off manually.

Loudness

You can get compensation on lower and higher

frequency for your radio by adjusting the loudness

function.

1. Press and hold the Menu/Info button to enter the

menu setting.

2. Rotate the Tuning control knob until "LOUD ON"

or "LOUD OFF" appears on the display. Press the

Tuning control knob to enter the setting.

3. Rotate the Tuning control knob to choose ON to

turn on the loudness function, then press the Tuning

control knob to confirm the setting.

4. To turn off the loudness function, select OFF and

press the Tuning control knob to confirm the setting.