Bluetti EB120 Bedienungsanleitung Seite 7

being charged. If the product is previously turned off, it will remain turned off unless you
manually turn it on.
Charge with AC power
Insert one end of the adapter into wall outlet and insert the other end to the input port of
the product. Then, the product will be charged and you can monitor the battery status by
checking the battery icon on the LCD screen The product comes with a built-in
advanced control circuit. When the battery is fully charged, it will stop charging itself
automatically.
Cold Weather
Cold weather can influence battery capacity. In sub-zero temperature (<0°C), you may
be able to discharge the product, but you should not charge it. Otherwise, the battery of
the product would be greatly damaged and the capacity may not even be recovered.
Low temperature charging protection: When the product is charged at a temperature
below 0°C, it will shut off and stop charging itself automatically. The product will reboot
and start charging itself when the temperature rise to above 10°C.
Low temperature discharging protection: If the product is discharged at a temperature of
-20°C, it will turn off. The product will reboot and turn on output when the temperature
rise to above -10°C.
FAQ
Q1: How to check charging status?
The battery icon indicates the battery level of this product. The battery level is displayed
in 5 segments. When battery is being charged, the icon would flash. When the battery is
fully charged, the icon would stop flashing and all 5 segments will be filled.
7