Operating Instructions; Automatic Switch-Off; The Heat Setting; Activation And Deactivation Of The Outer Rings - AEG HK955070XB Benutzerhandbuch

Display
OptiHeat Control (3 step Residual heat indicator)
WARNING!
/ /
OptiHeat Control shows the level of the residual heat.

OPERATING INSTRUCTIONS

Activation and deactivation
Touch for 1 second to activate or deactivate the appliance.
Automatic Switch Off
The function deactivates the appliance automatically if:
• All cooking zones are deactivated (
• You do not set the heat setting after you activate the appliance.
• You spill something or put something on the control panel for more than 10 seconds, (a
pan, a cloth, etc.). The sound operates some time and the appliance deactivates. Remove
the object or clean the control panel.
• You do not deactivate a cooking zone or change the heat setting. After some time,
comes on and the appliance deactivates. See the table.
The times of Automatic Switch Off

The heat setting

The cooking zone
deactivates after
The heat setting
Touch the control bar at the heat setting. Change
to the left or the right, if it is necessary. Do not
release before you have a correct heat setting. The
display shows the heat setting.

Activation and deactivation of the outer rings

You can adjust the surface you cook to the dimension of the cookware.
To activate the outer ring touch the sensor field
more outer rings touch the same sensor field again. The subsequent indicator comes on.
Do the procedure again to deactivate the outer ring. The indicator goes out.
The Automatic Switch Of function operates.
The risk of burns from residual heat!
, -
6 hours
Operating instructions
Description
).
-
5 hours 4 hours
/ . The indicator comes on. For
- -
1.5 hours
9