Wohler VIS 2000 Handbuch Seite 29

5. System components
5.4.6 Viper Camera Holder (Order no. 8680 J)
5.4.7 Camera Spring Guide (Order no. 8633 J)
5.4.8 Special Cable (Order no. 9181 L)
0.8 m, for the connection of the Camera rod to the monitor.
5.4.9 Camera rod
Camera rod black, flexible, 6 mm Ø, 5 m long
Camera rod black, flexible, 6 mm Ø, 20 m long (Order no. 7818 J)
Camera rod black, flexible, 6 mm Ø, 30 m long (Order no. 7819 J)
Camera rod red, stable, 7 mm Ø, 5 m long
Camera rod red, stable, 7 mm Ø, 20 m long
Camera rod red, stable, 7 mm Ø, 30 m long
e-mail: mgkg@woehler.de
The camera holder provides a connection
cable and a M 10 thread and therefore can
easily be connected to our cleaning rods.
The camera is in a protective cage and faces
down, so that incidental daylight does not
cause problems. Attached to rods both, hori-
zontal and vertical pipes can be examined.
For centering of the camera head in vertical
vents. A stainless steel spring prevents a
rotating and oscillating of the camera head.
The spring is adjustable to the tubing size.
(Order no. 7821 J)
(Order no. 7829 J)
(Order no. 7306 J)
Internet: http://mgkg.woehler.
Cable reel VIS 2000
(Order no. 7305 J)
29