Location Of Controls; Basic Operations; Sound Features - New One AR390DAB Benutzerhandbuch

LOCATION OF CONTROLS

1. MUTE Button: To mute or restore sound
2. MOD button: To turn unit on/ off; To select function mode
3. SEL/VOL knob: volume, select, enter knob
4. LCD display
5. Micro SD (TF) card slot
6. USB port for MP3 playback
7. Built-in USB charging port for smartphone or tablet
8. AUX jack
9. RST (RESET) button
10. 6/+10 button: To select preset channel 6 in radio mode; To skip forward 10 tracks (mp3 only)
11. 5/-10 button: To select preset channel 5 in radio mode; To skip backward 10 tracks (mp3 only
12. 4/RDM button: To select preset channel 4 in radio mode; To start/ cancel random playback.
13. 3/RPT button: To select preset channel 3 in radio mode; To repeat playback.
14. 2/INT button: To select preset channel 2 in radio mode; To start/ cancel intro playback.
15. 1/ button: To select preset channel 1 in radio mode; To start or pause playback.
16. CLK (Clock) button: To set clock time
17. : Skip forward; To answer / redial the phone
18. : Skip backward; To hang up the call
19. BND/ AMS/ TRANS: Band button (To select band: FM1, FM2, FM3 and DAB1, DAB2, DAB3);
Automatic storing/ Search a track; Transfer call
20. Built-in microphone
GB - 3

BASIC OPERATIONS

Turn on/off the unit
Press MOD button to turn on the unit. Press and hold this button again to turn off the unit.
Selecting the mode
When the unit is on, press MOD button repeatedly to select different source mode:
FM USB CARD AUX DAB
Note: USB, CARD mode can not be selected if no such source was plugged in the unit.
Current time display
Press CLK button to display the current time when unit is ON.
Adjust time:
1. When the unit is on, repeatedly press SEL/VOL button to select clock format setting mode.
2. Rotate volume knob anti-clockwise and clockwise to adjust 12 or 24 hour format.
3. Press and hold CLK button to enter into setting mode. The hour digits will flash.
4. Rotate SEL/VOL knob anti-clockwise and clockwise to adjust the hour value. Press CLK button
again to confirm the hour value.
5. The minute digits will flash, rotate SEL/VOL knob anti-clockwise and clockwise to adjust the minute
value. Press and hold CLK button to confirm
Noted:
- It will confirm your setting if no key is pressed within 5 seconds.
- In 12H clock format, be sure to observe the AM or PM indicator to set the hour correctly.
Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit. To set the
unit to initial status, press RST button on the front panel with a pointed object. When some errors occur
in display, you can also reset the unit, but it will erase the clock setting and some memorized functions.

SOUND FEATURES

Volume adjusting
To increase or decrease the sound level, rotate SEL/VOL knob clockwise or anti-clockwise.
Muting the sound
When the unit is ON, press MUTE to mute the sound. Press again to restore.
Using SEL/VOL knob to select sound feature
Repeatedly press SEL/VOL knob
To select the desired mode for sound setting in the following order: "BAS"(BASS)
"BAL"(Balance) "FAD"(Fader)
DX/ LOCAL CLOCK 12/ 24 AREA EUR/ USA.
After selecting the desired mode, you can adjust the level by rotating the volume knob.
Preset equalizer (EQ)
When you are listening to pop music, classic music or rock music, use the equalizer to adjust the sound
quality. Repeatedly press volume knob to select "EQ OFF" and rotate volume knob to select different
equalizer mode in following order: EQ OFF
BT
EQ OFF LOUD ON/ OFF STEREO/ MONO
FLAT CLASSIC ROCK
GB - 4
"TRE"(Treble)
POP.