Safety Instructions - infra world VITALlight Montage- Und Gebrauchsanweisungen

SAFETY INSTRUCTIONS:

• Attention: Covering the heater or infrared emitter causes danger of fire!
• Do not use infrared cabins with VITALlight IPX4 radiators longer than approx.
10 to 15 min. (according to your personal health).
• Recommended distance between radiator and body approx. 10 cm.
• Avoid continuous exposure to the eyes and respect a direct minimum distance
of about 70 cm between radiator and eyes.
• Ill people should ask a doctor before use.
• People subject to a risk of overheating, such as people suffering from cardio-
vascular diseases, should ask a doctor, in case of doubt, before using an
infrared cabin.
• Unprofessional installation may cause a fire hazard. Please read the assembly
notes carefully.
• Do not rub your skin intensively or take drugs, which stimulate the blood
circulation of the skin, before using the infrared cabin.
• We recommend not to use the infrared cabin within 24 h after UV radiation from
an artificial source or after sunbathing.
• If you belong to a group of people with limited heat sensitivity or are under the
effects of alcohol or tranquilizers, the infrared cabin should not be used.
• If you feel the heat too much on your skin, change your sitting position or leave
the cabin.
• Attention: If a prolonged erythema (constant redness of the skin for more than
a day) or net-like changes in colour after regular radiation with infrared appear,
do not repeat radiation anymore and consult your doctor, in order to prevent the
development of an erythema ab igne.
• This device may be used by children at the age of 8 years and older and by
persons with limited physical, sensorial or mental capabilities or lack of
EN
experience and knowledge, if they have been supervised or instructed in the safe
use of the device and are understanding the hazards arising therfrom. Children
are not allowed to play with the device. Cleaing and user maintenance must not
be performed by children without supervision.
• A suitable control unit must be used for adjustment or controlling of the infrared
radiators.
8