Assembly Notes - infra world VITALlight Montage- Und Gebrauchsanweisungen

ASSEMBLY NOTES:

1. Important:
Before starting-up remove the transport package, which protects the infrared lamp. To do so,
the cover grille of the radiator needs to be unscrewed (see fig. 1). Remove the foam packaging
used in transport (see fig. 2). Then screw on the cover grille again.
Attention:
2. The radiator can be assembled in an infrared or sauna cabin into the wall through a wall aperture
(see fig. 3 - fig. 5) or in the corner (see fig. 6).
fig. 1
fig. 3
EN
10
Do not touch the glass rod of the radiator with the fingers!
fig. 2
fig. 4