Declaration Of Conformity; Hood Connection; Setting Up - NEFF T16TS7KN-Serie Gebrauchsanleitung

Hood connection

en

Declaration of Conformity

Constructa Neff Vertriebs-GmbH hereby declares that
the appliance with functionality meets the basic
requirements and other relevant provisions of Directive
2014/53/EU.
A detailed RED Declaration of Conformity can be found
online at www.neff-international.com among the
additional documents on the product page for your
appliance.
2.4 GHz band: max. 100 mW
5 GHz band: max. 100 mW
BE BG CZ
ES FR HR
y
HU MT NL
SK FI SE
5 GHz Wi-Fi: for indoor use only
eHood connection
Y ou can connect this appliance to a suitable extractor
H o o d c o n n e c t i o n
hood and then control the functions of the hood via your
hob.
You have various options for connecting the appliances
together:
Home Connect
Two appliances can be connected using the Home
Connect app provided that both of them are Home
Connect-compatible.
Both appliances can be controlled via the app and via
the control panel.
Refer to the Home Connect documents supplied and
the Home Connect section for more information.
~ "Home Connect" on page 62
66
DK DE EE IE
IT CY LV LT
AT PL PT RO
UK NO CH TR
Connecting appliances directly
If the appliance is connected directly to an extractor
hood, the extractor hood can be controlled via the hob.
It is then not possible for either of the appliances to
connect to your home network or to the app. Both
appliances can be controlled via the control panel.
EL
Connecting appliances via your home network
LU
Use this type of connection if neither or one of the two
SI
appliances is connected to the Home Connect app.
If the appliances are connected to each other via your
home network, you can use both the hood controls and
Home Connect to operate the hob.
Notes
Make sure you follow the safety instructions in the
■
instruction manual for your extractor hood and that
these are complied with even when operating the
appliance via the hood controls on the
hob.~ "Important safety information" on page 51
If the appliance is being operated by means of the
■
controls on the extractor hood, this mode of
operation always has priority. It is not possible to use
the hood controls on the hob during this time.
In networked standby mode, your appliance requires
■
a maximum of 2 W.

Setting up

Both the hob and the extractor hood must be switched
on before you can connect them to each other.
To do this, refer to the section entitled "Connecting to
the hob" in the instruction manual for your extractor
hood.
Connecting directly
If you connect your hob directly to the extractor hood, it
cannot be connected to your home network as well and
you will not be able to use Home Connect.
Switch on the hob.
1.
Touch and hold the
2.
The product information is displayed.
U symbol for four seconds.