Haier HB16WMAA Gebrauchsanleitung Seite 13

GB
5.7.2.1 Adjust the temperature for fridge
1. Unlock the panel by touching key "G" if it is locked
(Fig. 5.5).
2. Touch key "A" (Fridge) to select the fridge compart-
ment. The actual temperature in the fridge com-
partment is displayed (Fig. 5.7.2-1).
3. Touch sequentially key "A" (Fridge) until the de-
sired value of temperature is flashing (Fig. 5.7.2-2).
A signal will sound at each key touch. The tempera-
ture increases in sequences of 1°C from a minimum
of 1°C to a maximum of 9°C. The optimum tem-
perature in the fridge is 5 °C. Colder temperatures
mean unnecessary energy consumption.
4. Touch any key except „A" (Fridge) to confirm, or the
setting confirms automatically after 5 seconds. Dis-
played temperature stops flashing.
5.7.2.2 Adjust the temperature for freezer
1. Unlock the panel by touching key "G" if it is locked
(Fig. 5.5).
2. Touch key "B" (Freezer) to select the freezer com-
partment. The actual temperature in the freezer
compartment is displayed (Fig. 5.7.2-3).
3. Touch sequentially key"B" (Freezer) until the desired
value of temperature is flashing (Fig. 5.7.2-4).
A signal will sound at each key press. The tempera-
ture increases in sequences of 1°C from -15°C to
-24°C. The optimum temperature in the freezer is
-18°C. Colder temperatures mean unnecessary en-
ergy consumption.
4. Touch any key except „B" (Freezer) to confirm, or
the setting confirms automatically after 5 seconds.
Displayed temperature stops flashing.
Notice: Influences on temperatures
The indoor temperatures are influenced by the following factors:
▶ Ambient temperature
▶ Frequency of door opening
5.7.2-2
Fridge
5.7.2-4
Freezer
▶ Amount of stored foods
▶ Installation of the appliance
5- Use
5.7.2-1
Fridge
5.7.2-3
Freezer
13