Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4 The owner is responsible for
ensuring that anyone who uses the
machine is duly informed about the
necessary precautions.
5 Your unit can only be used by one
person at a time.
6 Use suitable clothing and footwear.
Tie up your shoelace correctly.
1. ASSEMBLY INSTRUCTIONS.-
Take the unit out of its box and make
sure that all of the pieces are there:
The assistance of a second person
is recommended when assembling
this unit Fig.1.
(99) Main body.
(25) Main post.
(114)
Monitor.
(8L) Top focus bar, left.
(8R) Top focus bar, right.
(33L) Bottom focus bar, left.
(33R) Bottom focus bar, right.
(74) Rear
stabiliser
adjustable feet.
(95) Front stabiliser bar with wheels.
(10) Handlebar tube.
(42L) Pedal left foot.
(42R) Pedal right foot.
(35L) Left footrest.
(35R) Right footrest.
(29) Bottom post cover.
(15L) Covers main post left (L).
(15R) Covers main post right (R).
(23H) Focus bar spindle covers (L).
(23Q) Focus bar spindle covers (R).
(13) Bracket cover.
(124) Transformer.
Fig.2
(9)
Handlebar bracket.
(11) Spring washer M-7.
(12) Allen screw M-7x30.
(18) Flat washer M-8x36x3.
(19) Spring washer M-8.
(20) Screws M-8x20.
(21) Curved washer M-8.
(22) Screws M-8x20.
(24) Screws M-5x15.
(26) Flat washer M-6x15.
(27) Screws M-4x15.
(31) Self-locking nuts M-10.
(32) Flat washer M-10.
(34) Allen screw M-10x97.
(38) Head caps.
(39) Flat washer M-8.
(43) Spring washer M-10.
(44) Screws M-10x45.
(73) Allen screw M-8x70.
(93) Nylon nut M-8.
(103) Screws M-5x12.
(111) Allen key.
(112) Box spanner.
(136) Spring washer.
(150) Carriage bolt M-8x65.
(151) Carriage bolt M-8x70.
(152) Curved washer D20xD8.25x2T.
2. FITTING THE STABILISER
bar
with
BARS.-
First, lift the front of the machine and
rest it on a prop, such as the
packaging that you have just removed.
Bring the front stabiliser bar with
wheels (95) to the main body (99)
positioning the wheels at the front of
the unit, Fig.3, insert the screws (73),
fit the curved washer (21), and tighten
securely.
Take the rear stabiliser with adjustable
feet (74), and line up the dots Fig.4.
Insert the screws (73), fit the washer
(21)
and
securely.
3. FITTING THE BOTTOM POST
COVER.-
Take the main post (25) and insert the
bottom post cover (29) in the direction
of the arrow, Fig.5.
15
nuts
(8),
and
tighten
Werbung
Inhaltsverzeichnis
