Music Playback - fontastic ESSENTIAL Limboso Bedienungsanleitung

GB
TWS function
With the TWS function you can connect two Limboso loudspea-
kers together to output your music through two speakers.
To connect two Limboso, turn on both devices. Press and hold the
Play/Pause button (4) on one of the devices for about 4 seconds.
A signal will sound indicating that the devices are connected.
Then pair one of the two speakers with the audio source as
®
described under „Bluetooth connection".
Attention: When first TWS pairing the loudspeakers, the
function of your smartphone must be switched off
®
Bluetooth
while the TWS connection is being set up.
®
Activate the Bluetooth function after both speakers are
connected via TWS. To pair the speakers and the smart-
phone, follow the steps described in the „Pairing" section.

Music playback

Playing music via Bluetooth®
A Bluetooth ® source must be paired with Limbosoto receive and
output music wirelessly!
Play or pause the music playback by briefly pressing the Play/
Pause button (4).
Note: For music streaming, the audio source must support
A2DP profile.
Music control
To play or pause music, briefly press the Play/Pause button (4).
To skip to the next title, briefly press the Next title key (3).
To skip to the previous title, briefly press the Previous title
key (2).
Note: The phone must support A2DP and AVRCP profile to
play and control music through the Limboso speaker.
9