RaidSonic Icy Box IB-1820M-C31 Handbuch Seite 8

4. To connect the drive to the PC, push the button down and slide the
Type-C
™
5. To store the enclosure and protect the Type-C
button and slide the Type-C
Application
1. The external SSD can be connected to or disconnected from the com-
puter without shutting down the computer.
2. Please await the end of read/write operations before disconnecting
the SSD to avoid data loss.
3. A new SSD must first be initialized, partitioned and formatted by the
operation system to be displayed by the system.
4. If the drive isn't recognized instantly by the operating system please
check:
- if the driver software is installed (USB),
- if the SSD is initialized, partitioned and formatted.
Info
Drives must be initialized and have active partitions to be immediately recog-
nized as volumes in the operating system. If this is not the case, initialize the
drives in the volume management of your operating system.
The full USB 3.1 (Gen 2) transfer rate can only be achieved with a compatible
USB 3.1 (Gen 2) host computer. Furthermore, the USB 3.1 drivers must be
installed by the operating system. If this is not the case, install the appropriate
drivers for your operating system (Windows
For more information, please visit www.icybox.de.
Manual IB-1820M-C31
port out of the enclosure.
port back into the enclosure.
™
, macOS
®
port, press and pull the
™
).
®