Installation Instructions - Spelsberg Rapid-Box HT Montageanleitung

Installation instructions

Assembly and installation may only be carried out by qualified personnel. Applicable standards, installation
regulations and accident prevention regulations must be observed. Non-observance can cause damage to the
equipment and result in endangering life and limb!
The Rapid-Box is fastened using external fastening straps. Installation is possible both along vertical
HT
and horizontal alignments. For this purpose, it is necessary to use the fastening equipment certified in
accordance with building law
The housing openings must be closed with the enclosed locking screws resp. cable glands.
The cable glands must be mounted with the supplied O-ring.
ASSEMBLY
18