Dimensions
Seals
The required seal depends on the main
lines used in the respective application.
Conductors with the following
outside diameters can be inserted
and sealed in the Rapid-Box
Rated data
Ambient temperature
Standard
Conditions of installation
Protection class
Note: Additional electrotechnical data is given in the following table.
Article no.
A-440-01
A-440-02
A-440-03
A-440-04
:
HT
A-440-05
A-440-06
A-440-07
A-440-10
Branch via
cable gland
-25 °C to 40 °C / 77 °F to 104 °F
IEC 61439-2
fixed installation
IP66/67
Diameter range that can be sealed
Ø 9 to 14 mm
Ø 13 to 18 mm
Ø 17 to 22 mm
Ø 21 to 26 mm
Ø 25 to 30 mm
Ø 29 to 32 mm
Ø 32 to 34mm
completely closed
Ø 9-16 mm
TECHNICAL DATA
15