Chauvet DJ Intimidator Spot 375Z IRC Schnellanleitung Seite 5

MAIN LEVEL PROGRAMMING LEVELS
Pan Reverse
Tilt Reverse
Screen Reverse
Setup
Totem Mode
Running Mode
Sys Info
DMX Address
Temperature
DMX Linking
The Intimidator Spot 375Z IRC can work with a DMX controller. Instructions for connecting and configuring this product for
DMX operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from www.chauvetdj.com.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 498.
Master/Slave Connection
The Intimidator Spot 375Z IRC uses the DMX data connection for its Master/Slave mode. Information about configuring
the Intimidator Spot 375Z IRC for Master/Slave operation is in the User Manual, which is available from the Chauvet
website.
IRC-6 (Infrared Remote Control)
The Intimidator Spot 375Z IRC can be operated with the CHAUVET IRC-6. For more information about the IRC-6,
download instructions for the IRC-6 or the Intimidator Spot 375Z IRC User Manual from www.chauvetdj.com.
Gobos
Intimidator Spot 375Z IRC QRG Rev. 5
QUICK REFERENCE GUIDE
Pan Angle
Tilt Angle
DOWN
Sensitivity 001–100
DMX Loss
Sound
Reset
Factory Set
Ver:
_ _ _ _ _ _ _ Displays the current running mode
DESCRIPTION
OFF Normal pan operation
ON Reverse pan operation
OFF Normal tilt operation
ON Reverse tilt operation
OFF Normal display
ON Reverse display
540 Selects the 540° pan angle range
360 Selects the 360° pan angle range
180 Selects the 180° pan angle range
270 Selects the 270° tilt angle range
180 Selects the 180° tilt angle range
90 Selects the 90° tilt angle range
OFF Does not restrict the pan and tilt motion
UP Restricts the pan and tilt motion for overhead mounting
Restricts the pan and tilt motion for surface/floor mounting
Sets sound sensitivity
Hold Holds the last setting when signal is lost
Black Blacks out the product
Auto Sets the unit to Auto mode when signal is lost
Sets the unit to Sound mode when signal is lost
Resets the product
Loads factory defaults
V_ Displays the software version
_ _ _ Displays the current DMX address
_ _ _ Displays the current product temperature
EN
4