Jonsered 500 BAT Betriebsanleitung Seite 10

Starting the lawnmower
1. Ensure the charger cable is
disconnected from the mains and the
charger socket on the lawnmower/
2. Always start the
mower in short
grass or on a flat
surface.
3. Insert the safety
key in the slot.(H)
4. Pull the operator
presence control
(OPC lever) (J).
5. Continue to hold
the OPC lever in
place and press the
starter button (K)
on the control
panel.
K
STARTER
BUTTON
6. Release the starter button and
continue to hold the OPC lever to keep
the motor running.(J)
7. Start to mow when the motor runs at
normal speed.
English - 5
USE - STARTING AND STOPPING
Stopping the lawnmower
1. Release the OPC
2. Remove the safety
H
3. Always charge
J
L
lever.(L)
key to prevent
unintentional
starting when you
leave the machine.
(M)
M
the battery
immediately after
use!