Beko WTV8765BSCDOS1 Bedienungsanleitung Seite 28

You can check the function indicator on the button to follow whether the Remote Control function is On or Off.
If the Remote Control function is Off, all the operations are handled on the washing machine and only status
follow-up is allowed on the application.
If the Remote Control function cannot be enabled, you will hear a warning after pressing the button. This might
occur if the product is switched on or if there is no product paired through Bluetooth. Bluetooth setting being
Off or the washing machine's door being open are examples for such cases.
When you enable this function on the washing machine, said function will remain on except for certain cases,
allowing you to control your washing machine remotely via Bluetooth.
In certain cases, it deactivates itself for safety reasons:
• When your washing machine undergoes a power interruption.
• When the programme knob is turned to select a different programme or when the product is switched off.
4.3.15.4 Troubleshooting
Follow the steps below if you are having problem with controlling or connection. Observe whether the problem
persists or not after the action you have performed. Do the following if the problem is not resolved.
• Check whether your smart device is connected to the relevant home network.
• Restart the product application.
• Turn Bluetooth off and on through the user control panel.
• If the connection cannot be established with the above processes, repeat the initial set-up settings on the
washing machine.
If the problem persists, consult an Authorised Service Agent.
28 / EN
Washing Machine / User's Manual