Troubleshooting - Bosch FreshUp BPR11EE Gebrauchsanleitung

Troubleshooting

8 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Troubleshooting
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
Fault
The appliance is not
working.
Battery indicator lights
up red.
Appliance does not
switch on.
Plasma indicator flash-
ing red.
Appliance does not
switch on.
Odour reduction is not
functioning as usual.
Plasma generation
does not stop after lift-
ing the appliance.
Appliance is not char-
ging.
Cause and troubleshooting
Appliance is not charged.
Charge the appliance. → Page 21
▶
Activation area is pushed in.
Release the activation area.
1.
If the activation area is already in contact with the
2.
fabric, lift the appliance briefly.
If you have accidentally activated the activation area
3.
while holding the appliance, release this area.
Appliance is not charged.
Charge the appliance. → Page 21
▶
Plasma is not activating and the plasma indicator re-
mains white.
Press the appliance more firmly onto the fabric.
▶
Plasma treatment area is soiled and is not generating
even plasma.
Clean the appliance regularly. → Page 22
▶
Activation area sticks and does not automatically
spring back out.
Release the activation area.
1.
If the activation area is already in contact with the
2.
fabric, lift the appliance briefly.
If you have accidentally activated the activation area
3.
while holding the appliance, release this area.
Ambient temperature is too high or too low.
Charge the appliance in a warmer or colder envir-
▶
onment.
Appliance is not supplied with power.
Connect the appliance to the power supply.
▶
Check the circuit breaker in the fuse box.
▶
Troubleshooting en
23