Controls; Basic Operation; Switching On The Appliance - Bosch FreshUp BPR11EE Gebrauchsanleitung

en Basic operation
Activation area
2
Micro USB port
3
On/off button
4
Battery indicator
5
Plasma indicator, left and
6
right
5.2 Controls
You can use the control panel to con-
figure all functions of your appliance
and to obtain information about the
operating status.
Battery in-
dicator
White
White, flash-
ing
Red, flashing Appliance will run for
Red
Plasma in-
dicator
White
Purple
20
Meaning
Appliance is
charged.
Note: The appliance
switches itself off
after 5 minutes.
¡ Charging in pro-
gress.
¡ Appliance will run
for another
10-15 minutes.
another 10 minutes.
Charge the appli-
ance.
Meaning
Appliance is ready
for use.
Plasma is active.
Plasma in-
dicator
White, flash-
ing
Purple, flash-
ing
Red, flashing ¡ Activation area is
Red

Basic operation

6 Basic operation
Basic operation
6.1 Switching on the appli-
ance
Press and hold
▶
a If the white plasma indicator is lit
up, the appliance is ready for oper-
ation.
Meaning
¡ Maximum treat-
ment time has
been reached.
¡ Ventilate the room.
¡ Wait 10 minutes.
¡ Activation area
has been pushed
in for 20 seconds.
Remove the appli-
ance from the fab-
ric and treat once
again.
The appliance can-
not activate the
plasma as the cloth-
ing is damp.
pushed in.
¡ Transport locking
device has been
activated, prevent-
ing the appliance
from being acci-
dentally switched
on when in the
travel case.
¡ Temperature is too
high.
Contact customer
service.
for 1 second.