Cleyver Xflex Bedienungsanleitung Seite 16

VIRTUAL KEYS ON SCREEN :
Useful tips :
1. In case the system stops working, press and hold down the power
button until your device vibrates, then release.
2. Do not cover Receiver, Main MIC and Sub MIC.
3. Adjust the volume to a comfortable level to prevent hearing damage.
4. USB Type-C connector : please ensure that you connect charger
correctly to prevent damaging the USB port.
5. The SIM/SD tray is not waterproof, please ensure that it is closed
correctly to prevent water damage.
Waterproof warning :
1. The Xflex is IP68 certified.
2. USB rubber cover and SIM tray must be completely closed to
prevent water damage.
3. If the phone does come in to contact with water, it may affect the
audio quality for a short period. In this case please dry the phone using
a clean cloth and then allow it to stand and dry naturally for 30 minutes.
This should restore the audio quality to the correct standard.
4. Please do not use any other method, (hairdryers for example) other
than that listed above to dry your phone, as this will affect the phones
performance.
5. If your phone has received a strong shock or has been bent or
twisted, ensure that it does not come in to contact with water.
PREPARING TO INSTALL THE SIM/MICRO-SD CARD
Installing the SIM and Micro-SD Card :
1. Use the metal ejector pin provided to open the SIM tray.
2. Pull out the SIM tray.
3. Place the Nano-SIM1 in inside position.
4. Place the Nano-SIM2 or TF-Card in outside position.
5. Make sure that the Nano-SIM and TF-Card metal contact parts are
facing down and that the cut corner aligned with tray in the correct
position, as per the diagram shown above.
16