Disassembly - Abicor Binzel xFUME ADVANCED Betriebsanleitung

11 Disassembly

11 Disassembly
W
Risk of injury due to unexpected start
If power is supplied during maintenance, cleaning or disassembly, rotating parts can start running
unexpectedly and lead to injuries from cuts.
► Switch off the device.
► Disconnect all electrical connections.
From June 2021
EN - 22
CAUTION
xFUME
Disconnect the compressed air supply.
1
Remove the current clamp from the welding torch
2
cable assembly.
Remove the extraction hose(s).
3
Loosen the clamps on both sides and remove the
4
top section of the device.
Loosen the castors.
5
®
ADVANCED