Replacing The Turbines - Abicor Binzel xFUME ADVANCED Betriebsanleitung

9 Maintenance and cleaning

9.5 Replacing the turbines

W
Electric shock due to electronic component damage
When replacing carbon brushes and turbines, electrical connections must be disconnected and
reconnected. Fatal electric shock may occur if electronic components become damaged or improperly
uninstalled in the process.
► The carbon brushes and turbines should be replaced only by a qualified electrician.
From June 2021
EN - 20
WARNING
xFUME
Unscrew the two screws on each side and
1
remove the cover.
Remove three mounting screws on both turbines,
2
loosen the electrical connection, and remove the
turbines.
Dispose of the turbines in accordance with local
3
regulations.
 12 Disposal on page EN-23
Insert the new turbines, insert the mounting
4
screws, and establish the electrical connection.
Reverse the steps above to reassemble the
5
system.
®
ADVANCED