Fiorenzato HOME ALLGround Montage-, Bedienungs- Und Wartungsanleitung Seite 71

Reassembling the grinder
After cleaning, reassemble the grinder
• Insert the coffee dispensing tube (Item 1) into its
seat until it is attached to the magnet inside the
seat itself.
• Insert the removable chamber (Item 2) into the
machine body making sure to align it correctly.
• Fit the adjustment ring nut (Item 3) by acting as
follows:
A
Position the adjustment ring nut (Item 3) on the
machine body by aligning the red arrow (Item 4)
with the red reference notch on the removable
chamber (Item 5).
B
Press the ring nut against the machine body and
rotate it slightly anti-clockwise until the coupling
point is found. When the coupling point is
reached, the locking pin (Item 6) clicks upwards
blocking the rotation of the ring nut.
C
Press the locking pin (Item 6) and turn the ring
nut anti-clockwise again until it reaches the
desired working position.
• Fit the hopper (Item 7).
The machine is ready to be used again after being
supplied and refilled with coffee.
Fiorenzato | Cod. AllGround_001 Ed. 01/2021
EN
7
3
2
1
A
5
B
C
5
4
CLICK!
6
6
71 / 116