Samsung Evolution Kit SEK-1000 Bedienungsanleitung Seite 3

• A wireless network connection via Plug & Access is not supported. Use a different method such as entering a password or WPS
to establish a wireless network connection.
• Soft APs are not supported. Use Wi-Fi Direct to connect mobile devices to the TV directly.
• Installing the Evolution Kit may reset some of the existing TV settings.
Attaching the Evolution Kit to a TV
First, check the network status and ensure there is an Internet connection. Internet access is required to use the Evolution Kit.
✎
By mounting the Evolution Kit onto your existing Samsung TV, you can upgrade the TV's software without purchasing a new TV. Use the
Evolution Kit to unlock the new features and services offered by Samsung Electronics.
1. The TV must first be updated to the latest software version. Navigate to Software Update (Support > Software Update) and
update the software using one of the available methods.
2. Turn off the TV and then insert the Evolution Kit into the two slots as shown in the diagram below. Press the
right side of the kit and click the kit into place. Unplug the TV's power cable before mounting the Evolution Kit.
1 1
3. To make sure the Evolution Kit attached securely, press it again, as shown by the figure side.
2
English-3
PUSH button on the