Troubleshooting; Cleaning & Maintenance - Alpina SF-3920 Bedienungshinweise

Operation:
1. Uncover the top cover and fill clean water to required level.
2．Put adequate quantity of coffee powder or tealeaves in the filter cone.
3．Place the cups on the drip plate.
4．Place the tundish with the filtercone in the tundish support.
5．Close the top cover.
6．Switch on, the indicator lamp will light up and the machine begin working.
7．After boiling, when no water in tank, the coffee is ready.
Warning:
This appliance is equipped with a grounded, Type G, 2-pin power supply cord. This is a safety feature. Do not attempt to
defeat the safety purpose of this plug.
Danger of scalding:
Please use caution when using this coffee maker. The steam emitted from this aperture can be very hot.
Trouble Shooting
Problem
Water leaks out from lid of jug
The coffee drops too slow
The coffee maker does not work or
water leaks from the bottom
CLEANING & MAINTENANCE
1. Make sure the appliance is unplugged from electrical outlet before cleaning.
2. Wipe the outside body of the appliance with damp cloth.
3. The removable items (filter, filter holder, drip tray) can be washed on hot spray water (or in a dishwasher).
4. Decaled your appliance regularly. With normal use, after decaling, let the appliance work twice or more with only
water to rinse away the detergent remainders.
All manuals and user guides at all-guides.com
Possible cause
the jug is not placed properly
coffee powder is too fine
nylon filter too dirty
The coffee maker heats in
abnormal state or water leakage in
the unit
3
Repair/Solution
Align the jug with opening of the
funnel
Use coarser coffee powder
Clean the nylon filter
Do not use the machine, contact with
certified service centre.
ENGLISH