Carbest CI1000 Bedienungsanleitung Seite 58

GB
WARNING!
- Keep the generator away from other electric cables or wires such as distribution network.
- The DC receptacle can be used while the AC power is in use. If you use both at the same time, be
sure not to exceed the total power for AC and DC.
WARNING!
- Before connecting a device to the generator, make sure the electrical rating of the device does
not exceed the electrical rating of the generator.
- Be sure the device is turned off before plugging in the power cord.
WARNING!
- When the output indicator light (green) is OFF and the overload indicator light (red) is ON, press
the start switch to the STOP position, stop the engine at once and then start the engine again.
HNOTICE:
- When the device requires a large starting power, the overload indicator light (red) and the output
indicator light (green) may be ON together for a short period, but this is no abnormality. After the
device starts, the overload indicator light (red) will go out and the output indicator light (green) will
stay ON.
GROUND TERMINAL
Before using the generator, a ground wire must be connected to the ground terminal.
Before using the ground terminal, consult a qualified electrician. (Refer to Fig. 4.8 for CI 1000 and
Fig. 4.9 for CI 2000 /CI 3000).
58
DE