Inhaltsverzeichnis
Werbung
THARUS 38 – LCD 38-9210 TOP
TRACKING
AUTO-TRACKING
CLOCK
PHASE
PICTURE
CONTRAST
BRIGHTNESS
COLOR TEMPERAT
26
PICTURE
PICTURE
CONTRAST
BRIGHTNESS
COLOR TEMPERAT
MODE :STANDARD
COLOR TEMPERAT
MODE: USER
RED GAIN
BLUE GAIN
GREEN GAIN
RED BIAS
BLUE BIAS
GREEN BIAS
RESET
GRUNDIG Service
OPERATION AS A PC MONITOR
4
Select »AUTO TRACKING« with »P–« and confirm with »OK«.
The picture size and sharpness are set automatically.
5
Finish the setting by repeatedly pressing »
Note:
The setting can also be made manually. To do this, select the line »CLOCK«
(= horizontal picture size) or »PHASE« (= picture sharpness) after point
call up with »OK« and correct the setting with »
Setting brightness and contrast
1
Call up the menu with »
2
Select menu item »
– The »PICTURE« menu appears.
3
Select the »CONTRAST«, »BRIGHTNESS«, or »COLOUR TEMPERAT« line
with »P–« or »
P +
4
Set the required value with »
OPERATION AS A PC MONITOR
Setting the colour temperature
1
Call up the menu with »
2
Select menu item »
– The »PICTURE« menu appears.
3
Select »COLOUR TEMPERAT« with »P–« or »
The colour temperature can be set by calling up fixed values or by setting
manually.
Select the fixed colour temperature settings
1
Select the »9300 K«, »STANDARD«, or
»6500 K« setting with »
standard setting, 6500 K = red picture).
Setting the colour temperature manually
1
Select the »USER« setting with »
2
Call up the menu with »
3
Select the colour to be modified with »P–«, modify with »
i
confirm with »
«. Repeat the setting for all colours.
Note:
The modified values can be set back again with »RESET«.
___________________________________________
i
« until the menu disappears.
« or »
«.
i
«.
« with »
« and call up with »OK«.
z
« and call up with »OK«.
« or »
«.
____________________________________________
i
«.
« with »
« and call up with »OK«.
z
P +
« and call up with »OK«.
« or »
« 9300 K = blue picture, STANDARD =
« or »
«.
i
«.
« or »
Allgemeiner Teil / General Section
2
,
« and
27
1 - 17
Werbung
Inhaltsverzeichnis
