System Requirements; Driver Installation - i-tec C31METAL25LAN Gebrauchsanweisung

EN
SPECIFICATION:
• 1x integrated cable with USB-C connector (28cm) - for connecting
to a notebook , table or PC
• 1x Ethernet 2,5GLAN RJ-45 port (Realtek RTL8156B)
• OS: Windows 7 / 8 / 8.1 /10, macOS, Linux, Android, Chrome OS
• Dimensions: 61 x 23 x 17 mm
• Weight: 35 g

SYSTEM REQUIREMENTS:

Hardware requirements: Device with a free USB-C or Thunderbolt
Operating system: Windows 7 / 8 / 8.1 /10, macOS X, Linux, Android,
Chrome OS
DESCRIPTION:
1. RJ-45 port
2. USB-C connector
3. LED indication

DRIVER INSTALLATION:

Windows Operating System:
It is not necessary to install
device drivers. The drivers are
automatically installed from the
system or Windows Update after
the connection. In case of problems
with the installation
download the drivers on www.i-tec.pro
Mac Operating System:
It is not necessary to install device drivers. The drivers are automatically
installed from macOS X after the connection. In case of problems with
the installation you can download the drivers on www.i-tec.pro
CONNECTION TO A NOTEBOOK/ PC
Connect the adapter to an available network when the installation
procedure is completed.
• Connect an Ethernet cable to the Ethernet port of the adapter, and
then connect the other end of the Ethernet cable to an available
network HUB, switch or router.
6
USB-C Gigabit Ethernet Adapter
you can
3 port
TM