B) Miscellaneous - VOLTCRAFT CPPS-320-42 Bedienungsanleitung

All manuals and user guides at all-guides.com
• Always lay the cables so that nobody can trip over or become entangled in them. This poses a risk of injury.
• Do not wear any metal or conductive necklaces, bracelets, rings etc when working with power supplies.
Under no circumstances connect the power supplies and chargers to persons or animals.
• Check the product for damage before each use. In case of obvious damage, do not use the product
anymore. Disconnect the mains voltage and unplug the mains plug from the mains socket. Then have
the product checked by a specialist shop.
• Only use a correct power plug (100 - 240 V/AC, 50/60 Hz) of the public power supply as voltage source.
• The mains outlet must be located near to the device and be easily accessible.
• Do not touch the mains cable if it is damaged. First, power down the respective mains socket (e.g. via
the respective circuit breaker) and then carefully pull the mains plug from the mains socket. Never use
the product if the mains cable is damaged.
• Replace a damaged mains cable with a structurally identical new mains cable.
• Do not remove the mains plug from the mains socket by pulling on the cable!
• Unplug the product under the following conditions:
- before cleaning the product
- in case of a storm
- for extended periods of disuse.
• Please ensure adequate ventilation of the product during operation. Do not cover the ventilation ope-
nings with magazines, covers, curtains. Maintain a minimum distance of 15 cm from the other objects.
• When setting up the product, make sure that the cable is not pinched, kinked or damaged by sharp edges.
• Devices with strong electrical or magnetic fields such as transformers, motors, cordless telephones,
radios etc should not be placed near the product, since these could affect the product.
• Do not operate the product in areas or rooms with unfavorable ambient conditions. This can damage
the sensitive electronics inside the product and is a threat to life. Adverse ambient conditions are
defined as such:
- High humidity (> 80% relative, condensation)
- Humidity, dust, flammable gas, solvent vapors, petrol.
- High ambient temperature (> approx. +50 °C)
- Electromagnetic fields (motors, transformers etc.) or electromagnetic fields
• Do not attach the device just after moving it from a cold to a warm space. When this happens, con-
densation may form which can cause damage to the device. Wait until the product has adjusted to the
ambient temperature.

b) miscellaneous

• Consult a professional if you require assistance with product operation, safety or connection.
• Maintenance work, adjustments and repairs may be carried out only by a professional or at a specialist
workshop.
• If you have questions which remain unanswered by these operating instructions, contact our technical
support service or other technical personnel.
42