Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English (GB) Installation and operating instructions
Original installation and operating instructions
CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
These installation and operating instructions are also
available on www.grundfos.com.
Prior to installation, read these installation and
operating instructions and the servomotor's
manufacturer's instructions. Installation and
operation must comply with local regulations and
accepted codes of good practice.
4
1. General information
These installation and operating instructions contain all the
information required for starting up and handling the electric
servomotors for ATEX DMH pumps. These installation and
Page
operating instructions are required in addition to the servomotor's
4
manufacturer's instructions supplied with the servomotor.
4
If you require further information or if any problems arise, which
4
are not described in detail in this manual, please contact the
5
nearest Grundfos company.
5
5
1.1 Service documentation
5
If you have any questions, please contact the nearest Grundfos
5
company or service workshop.
5
2. Applicationsx
5
Grundfos servomotors, series 384, are designed for automatic
5
adjustment of the stroke length and consequently the dosing rate
5
of the Grundfos dosing pumps described in this manual.
ATEX servomotors are suitable for ATEX DMH single-head
6
pumps only.
6
6
Warning
6
Use the servomotor only for the specified pump
6
types!
7
7
Other applications are not approved and not
7
Caution
permitted. Grundfos cannot be held liable for any
damage resulting from incorrect use.
7
7
7
9
9
10
10
10
10
10
11
11
11
Werbung
Kapitel
Inhaltsverzeichnis
